VIA Technologies K8T800 Guía de usuario Pagina 45

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 140
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 44
ASUS K8V SE Deluxe motherboard
2-23
2. Floppy disk drive connector (34-1 pin FLOPPY)
This connector supports the provided floppy drive ribbon cable. After
connecting one end to the motherboard, connect the other end to the
floppy drive. (Pin 5 is removed to prevent incorrect insertion when
using ribbon cables with pin 5 plug).
3. RAID ATA connector (40-1 pin PRI_RAID)
This connector supports either RAID 0, RAID 1 or RAID 0 + 1
configuration with the Serial ATA connectors through the onboard
Promise
®
PDC20378 controller. You can use the RAID feature to set up
a disk array configuration and to support additional IDE devices.
Important notes on the RAID feature:
By default, the drive that you connect to the primary
connector follows the ATA133/100/66/33 protocol as an
independent drive, not as a disk array.
The RAID/SATA controller chipset does not support ATAPI
devices such as CD-ROMs, DVD-ROMs, etc.
Refer to sections “5.6 Promise
®
RAID Configurations” and
“5.7 VIA RAID Configurations” for details.
K8V
®
K8V SE Deluxe Floppy Disk Drive Connector
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
FLOPPY
PIN 1
K8V
®
K8V SE Deluxe RAID Connectors
NOTE: Orient the red markings
(usually zigzag) on the IDE
ribbon cable to PIN 1.
PRI_RAID
PIN 1
Vista de pagina 44
1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 139 140

Comentarios a estos manuales

Sin comentarios